Network changes
Ensure network adapters are disabled and/or spoofed.
Good to know: depending on the product you're building, it can be useful to explicitly IF WIFI OR BLUETOOTH IS STILL ENABLED AND YOU COULDNT DISABLE IT IN BIOS:
Follow this instructions first -> Click here to view.
Change MAC address
To make sure every Network adapter has a new MAC address please follow this instructions:
Download TMAC: Click here to download.
Extract the downloaded zip file (if you cant unzip it download 7-zip here).
Run TMAC_Setup.exe to install the Technitium MAC Address Changer.
After installation run TMAC from Windows Start or Desktop shortcut as admin.
If prompted, press NO to avoid associating ".tpf" files with TMAC.
Change the MAC Address for the following adapters: Wifi, Ethernet, Bluetooth
Select the adapter.
In the bottom left click Random MAC Address & Change Now!
If error occurs just ignore continue with next adapter.
Restart your computer after changing all MAC addresses.
Change adapter properties
1. Press Win + R, type ncpa.cpl and click Ok
Right-Click your active connection and click on Properties
Configure it as shown below:
Click Configure
Switch to Advanced and configure the following properties:
Advanced EEE - Disabled
ARP Offload - Disabled
Flow Control - Disabled
IPv4 Checksum Offload - Disabled
Large Send offload v2 (IPv6) - Disabled
Network Address - Not Present
TCP Checksum Offload (IPv6 ) - Disabled
UDP Checksum Offload (IPv6 ) - Disabled
If you don't have some of these options skip them and move on to the next step.
Disable unused Network adapters
Press Win + R, type ncpa.cpl and click OK
Remember the name of the active connection
Right-click the Windows logo, select Device Manager
Right-click and select Uninstall device on all other Network adapters
Now You should Only Have One Device Here Being Your Network
Last updated